SJ High-speed One-screw Exhaust Type Extruder

The machine is mainly used to extrude PVC, PP, PE, PP-R, ABS and other thermoplastic products, matched with corresponding auxiliary engines (including assembly drum), it also can process many kinds of plastic products, such as pipes, plates, silks, strips, special-shaped materials, granulation and so on.

Parameter and Model	Screw Diameter（mm）	Length to Diameter Ratio	Revolution（r/min）	Plasticizing ability（kg/h）	Drive Power（kw）	Central height（mm）	Weight（t）
Sj-30/25	30	25:1	17-102	SPVC5-10	3	1000	0.65
Sj-45/25	45	25:1	16-160	42	7.5	500-1000	1.5
Sj-65/25	65	25:1	17-84	40-65	18.5	1000	2.6
Sj-65/28	65	28:1	12-120	PEⅡO	22	1000	3
Sj-65/30	65	30:1	17-84	80	30	1000	3.5
Sj-90/25	90	25:1	12-72	SPVC40-100	37	1000	4
Sj-90/28	90	28:1	12-120	LOPE200	45	1000	4.5
Sj-90/30	90	30:1	12-120	Determined by materials	55	1000	4.5
Sj-90/33	90	33:1	12-120	LDPE210	55	1000	5
Sj-120/25	120	25:1	18-100	100-200	75	1100	5
Sj-120/30	120	30:1	18-100	100-260	90	1100	5.3
Sj-120/33	120	33:1	18-100	100-280	90	1100	5.6
Sj-150/25	150	25:1	18-100	120-300	132	1100	7
Sj-150/30	150	30:1	18-100	120-500	160	1100	7.5
Sj-150/33	150	33:1	18-100	120-600	200	1100	8